Wayne MAXI-Skimmer™ Model MWM for Wells
Wayne MAXI-Skimmer™ Model MWM has a 1″ or 2″ wide cogged polyurethane belt which fits into 2″ diameter (or larger) wells up to 50 feet deep.
Wayne MAXI-Skimmer™ Model MWM has a 1″ or 2″ wide cogged polyurethane belt which fits into 2″ diameter (or larger) wells up to 50 feet deep.
MWM units are fitted with a 1″ or 2″ wide cogged polyurethane belt (no slippage!) to fit into 2″ diameter (or larger) monitor wells as deep as 50 feet. They are fitted with a weighted nylon separator to separate the up and down cogs from inter-meshing. The lower tail pulleys are suited for the belt width and well diameter.
Incoming power is 115/1/60 which is converted to 90vac to run the gear motor. A dial changes the speed. All units are equipped with a lid handle kit and three foot outlet hose extension.
Optional accessories include an adjustable stand to allow product collection into a 55 gallon drum or other container. A Maxi-Sep™ gravity separator assures 100% product collection and allows recycling of any water collected. An inexpensive “plug-in” timer can control on-off times and a plug-in ground fault interrupter can provide electrical safety.
For wells over 6″ diameter, other Maxi-Skimmer types are available with one to four 4″ wide polyurethane or stainless steel belts! Belt reach is available to 100 feet down.
NOTE: Belt and lower pulleys not shown in picture.