Abanaki TubeTastic!™ Tube Oil Skimmer
The Abanaki TubeTastic!™ oil skimmer can be used on machining centers with little or no access to the CNC coolant sump from above. TubeTastic! can be mounted virtually anywhere through a machine slot or at the top of a tank. This unit can skim oil from chip conveyors or even totally enclosed machining centers!
The collector tube operates by running through the coolant where the clean tube travels into the coolant and oil laden tube travels out. While the tube is in the coolant, oil adheres to the outside of the tube. Then the oil is continuously scraped off and discharged into a waste oil drum.
FEATURES
- Fan-cooled continuous duty motor
- Oil pickup rate of up to 1 1/2 GPH
- Works in places where other skimmers can’t
- Standard tube lengths – reach: 8″, 12″, 18″ and 24″
- Longer lengths available
| Dimensions | 4″W x 6″L x 6″D |
|---|---|
| Weight | 6 lbs. |
| Motor Type | 110v, 1ph, 60Hz |
| Oil Removal Rate | 1 gph with 3/8″ dia. tube |
| Tube Material | Plastic – rated to 140 degrees F |
| Wiper Material | Rubber |
| Mounting Method | Side of machining center |
Recommended Accessories & Replacement Parts
The Abanaki Oil Concentrator performs as a virtually complete oil water separator for recycling or disposal of either liquid. This Oil Water Separator is non-electrical and contains no moving parts -- it simply receives liquid directly from the skimmer.
Abanaki TubeTastic™ Replacement Tubes in four standard lengths
Related products
The patented VariAxe Oil Skimmer system incorporates portability, decanting, separation, and gravity return of coolants to sumps and sources. It looks like a tube, but is actually a patented high strength elastomeric belting.
The NEXT Generation Tube Skimmer from Zebra with improved gear drive technology and longer tube life skims underneath conveyors, enclosed sumps, and hard-to-access areas
Zebra Sidewinder™ Tube Oil Skimmer replacement tubes and cartridges.