Dosatron Precision Water Powered Coolant Metering Pumps 3 GPM, 11 GPM, 20 GPM
$460.00 – $1,278.00
Dosatron chemical injectors are perfect for coolants, vibratory compounds, die lubes, detergents, cleaner, and rust inhibitors. Dosatron dispensers compensate for flow and pressure changes providing consistent, repeatable results.
Dosatron Precision Water Powered Coolant Metering Pumps 3 GPM, 11 GPM, 20 GPM
Dosatron chemical injectors are perfect for coolants, vibratory compounds, die lubes, detergents, cleaner, and rust inhibitors. Dosatron dispensers compensate for flow and pressure changes providing consistent, repeatable results.
FEATURES
- Can be used with hose reels, in-line, and in central mixing systems. Very accurate.
- Dose of concentrate is proportional to the flow rate
- Dose remains precise, constant, and regular throughout the operation
- Wide range of liquid or soluble concentrates can be used
- Hydraulic proportional system eliminates all risks of under or overdosing
- No direct contact with dangerous concentrates
- Operates continuously – just set it and leave it
- Externally adjustable
- Easy to use – just turn the water on!
- Pump below with “VV” designation has viscous hoses
- Most units are available in either AF (pH 7-14) or VF (pH 1-7) seals
NOTE: A water pre-filter is REQUIRED. See Accessories tab below.
| D07RE125VFII | 0.15 to 1.25% | 1:667 to 1:80 | 4.3 to 85 psi | .02 to 3 GPM | $632.00 |
| D07RE5VFII | 0.8 to 5.5% | 1:128 to 1:18 | 4.3 to 85 psi | .02 to 3 GPM | $632.00 |
| D25RE2VFII | 0.2 to 2% | 1:500 to 1:50 | 4.3 to 85 psi | .05 to 11 GPM | $460.00 |
| D25RE2VVFII | 0.2 to 2% | 1:500 to 1:50 | 4.3 to 85 psi | .05 to 11 GPM | $607.00 |
| D25RE5VFII | 1 to 5% | 1:100 to 1:20 | 4.3 to 85 psi | .05 to 11 GPM | $1070.00 |
| D45RE3AFII | 0.5 to 3% | 1:200 to 1:33 | 7 to 70 psi | 0.4 to 20 GPM | $1082.00 |
| D45RE8AFII | 3 to 8% | 1:33 to 1:12 | 7 to 70 psi | 0.4 to 20 GPM | $1278.00 |
| D07RE125VFII | 0.15 to 1.25% | 1:667 to 1:80 | 4.3 to 85 psi | .02 to 3 GPM | 0.08 to 12 LPM | 3 GPM / 12 LPM | 3/4″ NPT |
| D07RE5VFII | 0.8 to 5.5% | 1:128 to 1:18 | 4.3 to 85 psi | .02 to 3 GPM | 0.08 to 12 LPM | 3 GPM / 12 LPM | 3/4″ NPT |
| D25RE2VFII | 0.2 to 2% | 1:500 to 1:50 | 4.3 to 85 psi | .05 to 11 GPM | 0.19 to 42 LPM | 11 GPM / 42 LPM | 3/4″ NPT |
| D25RE2VVFII | 0.2 to 2% | 1:500 to 1:50 | 4.3 to 85 psi | .05 to 11 GPM | 0.19 to 42 LPM | 11 GPM / 42 LPM | 3/4″ NPT |
| D25RE5VFII | 1 to 5% | 1:100 to 1:20 | 4.3 to 85 psi | .05 to 11 GPM | 0.19 to 42 LPM | 11 GPM / 42 LPM | 3/4″ NPT |
| D45RE3AFII | 0.5 to 3% | 1:200 to 1:33 | 7 to 70 psi | 0.4 to 20 GPM | 1.51 to 76 LPM | 20 GPM / 76 LPM | 1″ NPT |
| D45RE8AFII | 3 to 8% | 1:33 to 1:12 | 7 to 70 psi | 0.4 to 20 GPM | 1.51 to 76 LPM | 20 GPM / 76 LPM | 1″ NPT |
Recommended Accessories & Replacement Parts
A water pre-filter is required with all Dosatron Metering Pumps. There are two filter options -- T-Filters or Y-Filters with Cleanouts.
Dilution Solutions pre-plumbed panel systems or locking cabinets include all the necessary accessories. Delivered installation ready!
Industrial Plumbing Kits INCLUDE the water pre-filter along with everything necessary to install the Dosatron or HydroBlend Water-Powered Coolant Metering Pumps.
Related products
The HydroBlend™ Proportioner is ideal for diluting: Fountain Solutions (One & Two Step Formulations, Alcohol, Alcohol Substitutes, Web Conditioners, Silicone, and Aqueous Coatings) NOTE: Only models in stock are available in the cart. Call or email to purchase other models, which will require some lead time.
Dosatron chemical injectors are perfect for coolants, vibratory compounds, die lubes, detergents, cleaner, and rust inhibitors. Dosatron dispensers are simple to use and easy to adjust allowing for flexible dosage rates.
Dual injection pump with dual adjustment screws. If you are mixing two different oil bases with water, this costs less than two separate units! Very accurate.