HydroBlend™ Water Powered Proportioning Pump Systems for Richer Dilutions
The HydroBlend™ 057-L6850-AV/F6850-AV Proportioning System for richer dilutions is a 7 GPM Continuous Injection Dual Pump System consisting of (1) 85 oz. Fixed Ratio Lube Style Pump, (1) 85 oz. Variable Pump, Vertical Mount. Mounted on a poly board, with by-pass plumbing to run either single or dual injection. It also comes with water pressure regulator, water T-Filter, and complete with plumbing attachments.
- Acrylic pump head and Viton seals standard
- Stainless steel valve block, outlet fitting, and main cylinder
- By-pass plumbing to run either single or dual injection
- Operates at 1.75 gpm @ 20 psi on factory regulator preset
- Richer dilutions are possible, up to 170:128 or 170 oz/gallon
- Product evaluation possibly required
- Reduces chemical waste, improves proportioning accuracy, repeatable formulations, easy installation, and reliable operation
1:1 Dilution Dual Pump System with By-Pass
| 057-L6850-AV/F6850-AV | 1.75 GPM @ 20 PSI | 1:15 to 1:1 | $5408.00 |
| L6850-AV/V6850-AV | 85 oz/gal | 1:15 to 1:1 | 6.25% to 50.00% | 7 GPM @ 75 PSI | 3/4″ Garden Hose |
1. The first section of the model number denotes the “6000” series pump and the maximum ounces injected per gallon of water.
2. The next section denotes the material used in the pump head (i.e. “A” stands for an Acrylic pump head).
3. The final section denotes the seal package used in the pump (i.e. “V” stands for Viton seals).
| Included Accessories | Mounting Feet, Suction Hose, Weighted Strainer/Footvalve, Operating Manual |
| Construction | Stainless Steel Valve Block, Outlet Fitting, Main Cylinder, and Chemical Cylinder |
| Alternative Pump Head Materials | A – Acrylic (standard)
PVC – Polyvinyl chloride HDPE – High Density Polyethylene (chemically resistant) K – Kynar/PDF (Paracetic Acid) |
| Alternative Seal Combinations | V – Viton (standard)
E – EPDM (specialty applications) TFE – Teflofluorethylene (chemically resistant) TTE – Teflofluorethylene (Lactic Acid) FS – Fountain Solution (Graphic Arts) PA – Perfluoroelastomer (Application Specific – Paracetic Acid) |
| Alternative Chemical Cylinder | Stainless Steel – Standard
316 Stainless Steel – Chemically Resistant Hastelloy – Chemically Resistant |
Note: These systems are designed to run open to the atmosphere with a minimum 1.0 inch I.D. discharge line. Deviation from this set-up will restrict the pump’s flow, causing the pump not to cycle correctly.
Related products
The HydroBlend™ Proportioner is ideal for diluting: Fountain Solutions (One & Two Step Formulations, Alcohol, Alcohol Substitutes, Web Conditioners, Silicone, and Aqueous Coatings) NOTE: Only models in stock are available in the cart. Call or email to purchase other models, which will require some lead time.
Dilution Solutions pre-plumbed panel systems or locking cabinets include all the necessary accessories. Delivered installation ready!
HydroBlend Custom Board Systems include key installation accessories all mounted on a poly board.