HydroBlend™ Water Powered Proportioning Pump Systems for Higher Viscosity
Hydroblend offers a comprehensive line of proportioners to accurately dilute the numerous metal-forming and stamping compounds. Low dilution, high viscosity products present a unique challenge. The proportioner must be designed to accurately deliver a high volume of chemical concentrate and minimize the potential effect of the concentrate friction loss.
Because of the viscosity and flow characteristics of the numerous concentrates, a chemical test of any product not previously evaluated is required. However, HydroBlend has successfully tested multiple concentrates from all the leading manufactures and most probably a product evaluation will be unnecessary.
- Viscosity to 6,000 SUS @ 100°F
- Operates at 1.75 gpm @ 20 psi on factory regulator preset
- Acrylic pump head and viton seals standard
- Stainless steel valve block, outlet fitting, and main cylinder
- Product evaluation possibly required
- Reduces chemical waste, improves proportioning accuracy, repeatable formulations, easy installation, and reliable operation
- Systems include: Hydroblend Proportioner mounted vertically on a poly board with an on/off valve, inline water pressure regulator with gauge preset to 15 psi, tee water filter, 3/4 FNPT PVC union, and plumbing attachments
- 087 systems include mixing chamber; 086 systems do not
- 0871 and 0861 systems include optional solenoid shut-off
087 Systems include mixing chamber; 086 Systems do not
| 087-6470-AV, VM | 1.75 GPM @ 20 PSI | 1:30 to 1:3 | $2373.00 |
| 086-6850-AV, VM | 1.75 GPM @ 20 PSI | 1:15 to 1:1.5 | $2878.00 |
0871 and 0861 Systems include solenoid shut-off
| 0871-6470-AV, VM | 1.75 GPM @ 20 PSI | 1:30 to 1:3 | $2626.00 |
| 0861-6850-AV, VM | 1.75 GPM @ 20 PSI | 1:15 to 1:1.5 | $3069.00 |
HydroBlend 087 System Schematic Diagram
HydroBlend 086 System Schematic Diagram
| 087-6470-AV | 47 oz/gal | 1:30 to 1:3 | 3.20% to 26.80% | 7 GPM @ 75 PSI | 3/4″ Garden Hose |
| 086-6850-AV | 85 oz/gal | 1:15 to 1:1.5 | 4.70% to 35.00% | 7 GPM @ 75 PSI | 3/4″ Garden Hose |
1. The first section of the model number denotes the “6000” series pump and the maximum ounces injected per gallon of water.
2. The next section denotes the material used in the pump head (i.e. “A” stands for an Acrylic pump head).
3. The final section denotes the seal package used in the pump (i.e. “V” stands for Viton seals).
| Included Accessories | Mounting Feet, Suction Hose, Weighted Strainer/Footvalve, Operating Manual |
| Construction | Stainless Steel Valve Block, Outlet Fitting, Main Cylinder, and Chemical Cylinder |
| Alternative Pump Head Materials | A – Acrylic (standard)
PVC – Polyvinyl chloride HDPE – High Density Polyethylene (chemically resistant) K – Kynar/PDF (Paracetic Acid) |
| Alternative Seal Combinations | V – Viton (standard)
E – EPDM (specialty applications) TFE – Teflofluorethylene (chemically resistant) TTE – Teflofluorethylene (Lactic Acid) FS – Fountain Solution (Graphic Arts) PA – Perfluoroelastomer (Application Specific – Paracetic Acid) |
| Alternative Chemical Cylinder | Stainless Steel – Standard
316 Stainless Steel – Chemically Resistant Hastelloy – Chemically Resistant |
Related products
Dilution Solutions pre-plumbed panel systems or locking cabinets include all the necessary accessories. Delivered installation ready!
Dosatron chemical injectors are perfect for coolants, vibratory compounds, die lubes, detergents, cleaner, and rust inhibitors. Dosatron dispensers are simple to use and easy to adjust allowing for flexible dosage rates.
Dual injection pump with dual adjustment screws. If you are mixing two different oil bases with water, this costs less than two separate units! Very accurate.