ClearWater Tech Microzone CD550 Ozone Generator
The Microzone CD550 provides superior disinfection at an ozone output of 0.55 grams per hour. Easy to maintain and install, the CD550 packs a punch in a compact size.
NOTE: This unit does not move the air through itself. It MUST be paired with either a Mazzei-type injector (which pulls the air) or a compressor or aerator (which pushes the air).
NEW DESIGN FEATURES
- Updated corona discharge reaction chamber cell design, stainless steel and glass construction
- Increased longevity and ease of service
- Cooling fan
- New look – extruded powder-coated aluminum cover
- Optional: on-board interlock relay
DIMENSIONS
- 5.6″ h x 10.0″ w x 3.60″ d, 4.5 lbs.
OZONE OUTPUT
- 0.55 grams/hour @ 6 SCFH on ambient air
ELECTRICAL
- 120V/60Hz, 0.30 amps
ACCESSORIES
The Microzone CD550 does not move the air through itself. It MUST be paired with either a Mazzei-type injector (which pulls the air) or a compressor or aerator (which pushes the air).
The least expensive option is to pair it with a small aquarium-type pump, such as the Zebra XBUB Oygenator™ aerator.
Link to Zebra XBUB Oxygenator™ Aerators
ClearWater Tech offers only the larger air compressors, the OAS7 and OAS20.
Link to ClearWater Tech OAS Air Compressors
Adding a Mazzei-type injector can be tricky. Injection manifolds must be sized based on actual flow rate, pressure, and air flow suction for the application in which it is intended.
ClearWater Tech injection systems use only Mazzei injectors for maximum mass transfer efficiency. The injector produces a cavitation effect, enabling the ozone gas to join the water stream in the form of extremely tiny bubbles. These bubbles must be as small as possible in order to increase the ratio of bubble surface area to the amount of ozone entering the water.
Link to PDF of ClearWater Tech Mazzei Injection Manifolds
Call or email for pricing on ClearWater Tech Injection Manifolds.
REPLACEMENT PARTS
| DIF32 | Replacement Difuser Stone, 3/16 barb | $17.00 |
ROUTINE MAINTENANCE
Over time, the diffuser may become clogged and result in air compressor damage. It is recommended that the diffuser is cleaned once a month by submersing it in a solution of 50% water and 50% muriatic acid for a few hours. Rinse thoroughly with water before re-installing.
Microzone Series Specifications – New Models
| CD325 | 0.325 @ 6.0 | 0.30 | V/P | 0.25 | 0.13 | 5.6″ h x 10″ w x 3.6″ d | 4.50 |
| CD550 | 0.550 @ 6.0 | 0.30 | V/P | 0.30 | 0.15 | 5.6″ h x 10″ w x 3.6″ d | 4.50 |
Recommended Accessories & Replacement Parts
Recommended ClearWater Tech Mini Series Accessories include the Mazzei injector manifold, check valve assembly, vacuum break, and SCFH Vacuum Gauge Assembly with vacuum switch.
Air compressors are used with a diffuser or an injector to inject ozone into liquid. ClearWater Tech designs a variety of these control and delivery accessories to establish the highest performance and adaptability for every ozone system.
Injecting oxygen into coolant using the Zebra XBUB Oxygenator™ aerator maximizes the coolant's performance by killing anaerobic bacteria and encouraging the good aerobic bacteria.
Related products
The Microzone 300P is a corona discharge ozone generator with a built-in air compressor and timer. Designed to deliver ozone under low pressure. Perfect for smaller water treatment applications, such as residential spas, ornamental water features, small aquariums, water vending machines, water store recirculation systems, and even RV holding tanks!
Easy to install and maintain, the Microzone CD325 provides superior ozone disinfection in a compact size. Requiring no air prep, it is ideal for residential spas, ornamental water features, small aquariums, fresh water holding tanks, well water treatment, and machine coolant applications.
The Microzone 100 is a compact, corona discharge ozone generator with fully adjustable output, low energy requirements (12 volt), and compact size. It is ideal for smaller water treatment applications, such as residential spas and ornamental water features.